V0.17.4nl (2022-11-18)

• This is a release without lora functionality (no-lora)

V0.17.4 (2022-01-20)

• removed test and staging environments

• set QoS to 1 for the out messages

V0.17.3 (2022-01-13)

• updated environment def (mqtt hosts)

V0.17.2 (2021-07-13)

• Better control of mqtt out messages (popping from the buffer)

V0.17.1 (2021-02-18)

• Imelda: On incoming mqtt message, only the last 4 digits of the phone number are kept

• Disabled TLS check for registration check (in the TLS client node)

V0.17.0 (2020-09-28)

• Updated to DECT API v4.x

V0.16.0 (2020-09-17)

• Reorganized worksheets

• Lora will never delete devices automatically, but there is an option on the Troubleshooting page to remove the devices which are not anymore present in the remote configuration

V0.15.3 (2020-08-21)

• Updated format of lora messages published via mqtt

V0.15.2a (2020-08-20)

• Modbus request timeout is limited to 10s now

• Fixed incorrect handling of modbus write requests

V0.15.1a (2020-07-14)

• lora messages are sent to a different topic and they have a custom format

V0.15.0a (2020-07-01)

• Implemented Lora protocol

V0.14.0 (2020-05-07)

• Implemented DECT communication

V0.13.2 (2020-01-13)

• Added mqtt status logging to troubleshoot LIFO buffer

• added wan monitor node to the buffer output enable/disable logic

V0.13.0 (2019-12-18)

• Implemented LIFO buffer, removed Smartbuffer

V0.12.0 (2019-11-07)

• Uses Smartbuffer now

V0.11.2 (2019-10-18)

• increased QoS of the write messages to 2

V0.11.1 (2019-10-18)

• if mqtt will not reconnect for a while, restart the flow

V0.11.0 (2019-10-08)

• Implemented wwan signal strength reporting

V0.10.2 (2019-09-26)

• Optimization for the mqtt queue: Since the mqtt queue unnecessarily stores all the properties of the message in the queue, a new message is now sent to mqtt out containing just the topic and payload

V0.10.1 (2019-09-23)

• Increased mqtt queue to 2000 records

V0.10.0 (2019-09-20)

• Implemented the new registration call

V0.9.12 (2019-09-19)

• adedd logging nodes for mqtt control and sentry

• improved modbus error handling for reads and writes

v0.9.11 (2019-09-19)

• handles ILLEGAL DATA ADDRESS error

V0.9.10 (2019-09-19)

• changed mqtt Acc port to 8993 (request by Geert)

V0.9.9 (2019-09-19)

• removed erroneous delay after a modbus error

V0.9.8 (2019-09-16)

• small debug improvement added

V0.9.7 (2019-09-12)

• offset and correctionFactor were not processed when writing (were not in the original specs). Implemented as requested by Geert

V0.9.6 (2019-09-11)

• as requested by Geert on 11/09/2019, we’ll look for offset and correctionFactor first at the modbusRegisterConfigs level, then at the modbusvalues level

V0.9.5 (2019-09-10)

• Fixed modbus write (baudrate was wrong)

V0.9.4 (2019-09-10)

• translation field was not working for read operations

V0.9.3 (2019-09-06)

• Back to the increasing registration check delays, from 60 seconds to 1 hour with doubling the delay

V0.9.1 (2019-07-25)

• identical sentry messages are ignored

• more info sent to sentry

• added some nodes to help troubleshooting mqtt messages

V0.9.0 (2019-07-12)

• production port is 8993

• added {version} to the register call

• the flow version is displayed on the UI page

V0.8.5 (2019-07-05)

• modbus timeout represents the timeout in ds (deciseconds, or tenths of seconds)

V0.8.4 (2019-07-05)

• removed the frequency factor

V0.8.3 (2019-07-05)

• set the default environment to Prod

• set the environment list

V0.8.2 (2019-07-05)

• fixed LED modes

V0.8.1 (2019-06-14)

• Write errors are handled the same as the read errors (modbuserror + sentry)

• Write status message contains a hardcoded field type = ‘WRITE’

V0.8.0 (2019-06-14)

• Write operations updates:

  • implemented expiration feature

  • write status will be posted to a different topic

  • uuid will be copied from the request to the status message

  • “result” field is now a string: EXECUTED/ERROR/EXPIRED

V0.7.5 (2019-06-14)

• COIL and DISCRETE values are supported now

V0.7.4 (2019-06-14)

• logs the configuration objects by uuid, for troubleshooting purposes

V0.7.3 (2019-06-14)

• logs the last message sent via mqtt, by uuid, for troubleshooting purposes

V0.7.2 (2019-06-14)

• if the value cannot be decoded, treat is as an error and send it to sentry as well

V0.7.1 (2019-06-12)

• The unhandled modbus errors will not be sent via mqtt

V0.7.0 (2019-06-12)

• implemented LED status

V0.6.2 (2019-06-12)

• fixed EBADQUANT modbus erorr

V0.6.2 (2019-06-11)

• enabled queing feature of mqtt out

V0.6.1 (2019-06-11)

• release nr. and SNR are displayed as node info

• Modbus errors are sent to sentry

• Implemented sentry error reporting

• Implemented GPS data reporting